CNC Panel Pro V1.0.0 — CAD library and zero-gap repeats
Build: uniform-custom-clean-faces-20261120

Install ONE edition using SketchUp Extension Manager, close all SketchUp windows
and restart. Version stays 1.0.0. About identifies 37 patterns and this library.

Library sequence
Pattern 01–13 are extracted from the owner's final patterns.dwg in its numbered
1–13 order, not inferred from screenshots. Each source cell is 200 x 200 mm.
Pattern 14–37 are the previous 24 gallery entries in their existing order.
NEW_PATTERN_REFERENCES.json records both source and previous gallery numbers.
Existing internal IDs, saved favourites and recipes remain supported. Recreate
existing panels to receive updated geometry; saved model geometry is not changed
by installing an extension update.

CAD preparation
DWG vector linework was read using LibreDWG (offline authoring only). Curves were
flattened to 0.003 mm chord tolerance in the original 200 mm drawing cells.
Open source joins were closed along their tangents; short overshoots and dangling
non-enclosing strokes were removed from face construction. Two stems in source
10 were extended 7.20881 mm to the cell boundary. Source 8 includes two split bar
fragments merged back into their adjoining material. Preparation reports and
source-to-gallery mappings are included in the website update verification kit.
Patterns 03/11 are similar in the supplied drawing and remain separate entries.

Zero-gap behavior
Tile gap X and Tile gap Y default to 0. Signed values are supported. Zero means adjacent repeat cells share
the same boundary, with no extra engine spacing or minimum gap. For the older
image-derived patterns, excess margins in the artwork have been removed by
calibrating the repeat window to the design's interior bar spacing. Actual bars
and the separately entered outer Border remain part of the design. Positive
X/Y gaps add only the specified extra distance between repeat cells. Negative
gaps overlap adjacent repeats and union their geometry, sharing existing borders.
For two 10 mm borders that would form a 20 mm seam, a -10 mm gap leaves a 10 mm
seam, when the tile is at that physical scale. X/Y are independent. Repeat pitch
must remain at least 0.5 mm, and geometry limits still apply.
All 37 cells use one unit square. Manual tile size 200 mm means 200 x 200 mm for
every pattern. Independent X/Y counts fit exactly the requested grid to the
usable face span: (span - (count - 1) * gap) / count. Leave counts empty for
manual sizing. Both counts set can create rectangular cells. Real boundaries,
existing holes, rotation and offsets can clip cells at the edge of the face.

Final controls
There is no visible Units dropdown. The drawing's default units are obtained from
SketchUp at dialog initialization. Length fields accept mm, cm, m, inches and feet,
including fractions and mixed feet/inches. On committing an entry or pressing
Preview, it is converted to the drawing units and the symbol is displayed inside
the field. Numeric settings packets retain the corresponding unit for placement.
Typing is not interrupted by inserting suffixes during delayed live previews.
Counts and rotation remain dimensionless/degree controls. Presets in other units
are converted into the drawing's units while preserving physical dimensions.

The small icon-only 3x3 grid chooses the start of the repeat in face-local X/Y,
after Border and Rotation: top/middle/bottom and left/centre/right. New custom
profiles start at top left. Older recipes without an origin retain centre.
Manual corner/edge origins place the first cell flush with that usable boundary,
with partial terminal cells clipped to the real face. Negative overlap never
adds an earlier cell outside that start corner. Explicit tile counts fill the
whole usable span, so fitted cells cover the same span for every origin.
Offsets deliberately shift the chosen origin. The origin is saved in presets,
Edit recipes, layout and curved-skin caches. The view camera is not changed.

Custom profiles from SketchUp or DWG/DXF use the same gaps, counts, border,
thickness, rotation, position, direction, mirrors and source checkboxes. Manual
width preserves source aspect. Independent counts override the corresponding
axis using (usable span - (count - 1) * gap) / count, including negative gaps.
Both counts disable manual size. New custom profiles add no automatic gap.
Compound profiles with at least three aligned apertures or filled shapes and
consistent internal spacing are calibrated as one repeat group. The inferred
repeat boundary uses half the internal gap at each outer edge, avoiding the
wide seam after every third shape. A single aligned row/column uses the same
source gap on the other axis. Multiple rows/columns use their own measured gaps.
Arbitrary single motifs and inconsistent source gaps are retained unchanged.
All three shapes remain ONE tile; count X=4 repeats the complete group 4 times.
Manual tile width refers to this calibrated group cell. Independent fitted counts
can stretch axes, so physical X/Y gaps need not equal each other after stretching.
Zero X/Y inputs mean this continuous source spacing. Positive/negative values are
additional adjustments after calibration. Keep them at zero for uniform repeats.
The original profile contours are saved unchanged and recalibration is cached.
Older engine packets without the uniform flag still replay their former layout;
selecting/editing a custom profile in this UI enables the corrected repeat.
Legacy single-gap presets transfer their old gap to X/Y and retain Auto counts.
Direct old engine packets retain their former layout until edited.

Geometry and controls
Final cutting outlines are recovered from the actual triangulated cap boundary,
removing doubled zero-area slit edges at CAD repeat/outer-boundary contacts.
Prepared cell meshes and bounded layout/curved caches remain. Every changed
setting invalidates stale previews. No hidden minimum gap is introduced.
Search accepts 1, 01, Pattern 1 or Pattern 01. Custom profiles continue numbering
with two digits. Search, favourites, presets, thumbnail size, draggable divider,
mirrors X/Y/Z, direct position controls, multi-face selection and editing remain.
Border defaults to 1 inch; thickness to 18 mm; hide/delete source default off.
Source actions are mutually exclusive checkboxes within the Apply Undo operation.
Material-selection/texture UI and DXF Export remain removed. The newly requested
neutral default finish is applied to both face sides using the model's default
front colour; no normals are reversed merely for colouring. Lighting/shadows can
still shade a neutral colour. It does not change the model's rendering style.
Separate CNC Pattern Pro V1.0.2 and its update metadata remain unchanged.

Verification and limits
Node tests cover the full 37-entry sequence, physical sizing, true boundary
perimeter and cap area, mirrors, rotation, zero border, solid mode, web, offsets,
X/Y gaps, fitted counts and curved skins. Actual UI handlers use DOM doubles.
CAD extraction, source repairs and repeat-window changes have separate audits.
The current checks cover 130 origin/overlap layouts, all 37 built-in patterns,
manual and fitted counts, true cap topology/area/perimeter, the 20-to-10 mm seam,
curved cache invalidation, five-unit display/input conversion, nine grid buttons,
presets, editing, live typing, plus the 135-case custom geometry regression.
The uniform-repeat update adds 40 compound profile cases with 18 apertures from
3x2 complete three-shape tiles. Actual CRuby 3.3 compilation passed for all 13 Ruby
files. Ruby API doubles exercise coplanar cleanup, crease/hole preservation,
front/back default colour and propagated failure; a 16-triangle planar boundary
case preserves its hole. These are not native SketchUp kernel/viewport tests.
Optional headless Chromium checks were blocked by the runtime socket restriction;
only DOM-double UI checks ran successfully in this workspace.
Flat selections consisting of coplanar facets now use the flat geometry path.
After insertion, genuinely coplanar shared edges are dissolved, including hidden
triangulation edges. Perimeter, hole contours and noncoplanar creases are retained.
Area/manifold validation rejects a cleanup that would lose geometry; a failure
propagates to the existing single-operation rollback. Default source-hide/delete
preferences remain off. Kept source geometry at the same plane can still overlap
output; use the existing Hide source checkbox when retaining it is unnecessary.
Native Windows SketchUp is unavailable here: final placement, real Undo/Redo,
GPU colors and native timings require testing in SketchUp. No universal fraction-
of-a-second creation guarantee is claimed. Website files are prepared, not deployed.
